Dual-Unit Technical Specifications (AC-24U-1100)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| Usable Rack Height | 24U (1066.8 mm / 42.0 in) | EIA-310-E 19-inch square-hole rails with laser-etched U numbering |
| External Dimensions (H × W × D) | 1320 × 750 × 1100 mm (52.0 × 29.5 × 43.3 in) | Fits standard 810 mm (32 in) commercial office doorways on heavy-duty castors |
| Max Usable Rail Depth | 880 mm (34.6 in) rail-to-rail + 120 mm rear cable bay | Accommodates full-length 4U multi-GPU chassis and high-current power cords |
| Acoustic Attenuation | 26–30 dB(A) broadband (<45 dB(A) external @ 1 m) | 30 mm convoluted acoustic foam + mass-loaded vinyl barrier + sealed neoprene gaskets |
| Continuous Thermal Extraction | 3.8 kW (12,966 BTU/hr) continuous | 6× ultra-quiet PWM/EC rear exhaust fans with automated thermistor speed curve |
| Office Power Architecture | Dual 120V / 20A (NEMA 5-20P or L5-20P) or 208V–240V | Delivers 3,840 W continuous under NEC 80% rule without 240V panel rewiring |
| Internal Bay Layout | Upper locking sliding shelf + lower reinforced 4U GPU bay | Dedicated isolation for 4U AI servers, 2U NVMe storage, UPS, and top-of-rack switch |
| Static / Dynamic Load Rating | 680 kg (1,500 lb) static / 450 kg (992 lb) rolling | Welded cold-rolled steel inner skeleton with 4 leveling feet + lockable castors |
| Cabinet Empty Weight | 178 kg (392 lb) | High-mass composite acoustic panels suppress low-frequency fan drone |
| Standards & Compliance | EIA-310-E mounting & UL 94 HF-1 acoustic liner | Built to EIA-310-E mounting and acoustic engineering design standards; third-party acoustic/thermal test reports available per project |
Target Applications & Operating Fit
- Law firms and accounting practices deploying on-premise private AI / RAG LLM inference nodes with zero cloud data leakage
- Engineering, biotech, and software offices housing 4U quad-GPU or octo-GPU workstations directly next to desks
- Regional branches replacing noisy open racks where 2.4 kW legacy acoustic cabinets overheat under modern GPU loads
- Facilities lacking 240V server-room electrical drops that rely on two standard 120V/20A office wall receptacles
Structural & Standards Engineering
- Dual-circuit 120V/20A A/B power inlet architecture with brush-sealed acoustic cable glands for 3.84 kW continuous office operation
- Reinforced lower 4U GPU bay with heavy-duty fixed support brackets plus an upper key-locked sliding utility/KVM shelf
- Front-to-rear S-curve acoustic labyrinth ducts lined with Class-0 / UL 94 HF-1 flame-retardant open-cell acoustic foam
- Thermally controlled 6-fan EC exhaust array with acoustic decoupling grommets and front temperature telemetry display
- Built to EIA-310-E mounting and acoustic engineering design standards; third-party acoustic/thermal test reports available per project
5-Parameter Engineering Modification Scope
- Exterior architectural finish: Natural Warm Oak, Dark Walnut, Matte Graphite Charcoal (RAL 7016), or Architectural White (RAL 9003)
- Pre-installed metered or switched 0U PDUs configured for dual 120V/20A (NEMA 5-20P/L5-20P) or international 230V/16A (IEC C20 / Schuko / BS1363)
- Electronic keypad, RFID badge, or biometric access lock for HIPAA / SOC 2 physical audit trails
- Top or rear 150 mm (6 in) flanged duct collar to exhaust hot air directly into a building return plenum
- Pre-wired internal KVM console tray, blanking panel kit, and seismic / floor bolt-down brackets
Technical FAQs
Can the AC-24U-1100 really cool a 3.5 kW to 3.8 kW 4U GPU server without overheating?
Yes. Unlike legacy 24U office acoustic racks capped around 2.4 kW, the AC-24U-1100 pairs wide cross-section intake/exhaust acoustic plenums with 6 high-static-pressure EC exhaust fans (~480 CFM net through baffles). As long as room ambient stays at or below 24 °C (75 °F) and unused U-spaces are fitted with blanking panels, internal intake-to-exhaust rise stays within server manufacturer thermal envelopes.
How do dual 120V/20A circuits work in a standard North American office?
Under NEC 80% continuous load limits, one 120V/20A branch circuit safely supplies 1,920 W. By routing two independent 120V/20A office circuits into the cabinet's A and B 0U PDUs, you gain 3,840 W of continuous power for dual-PSU GPU nodes and UPS units—eliminating expensive 240V electrical panel upgrades.
What is the maximum server chassis depth that fits inside the 1100 mm exterior depth?
Adjustable front and rear 19-inch EIA-310-E rails support server chassis up to 880 mm (34.6 in) deep while leaving 120 mm (4.7 in) of rear acoustic exhaust and power/fiber bend-radius clearance plus front intake plenum space.
Will the cabinet roll through a standard commercial office doorway?
Yes. At 750 mm (29.5 in) external width and 1320 mm (52.0 in) height on heavy-duty castors, the AC-24U-1100 passes through standard 810 mm (32 in) and 914 mm (36 in) interior office doors and passenger elevators without disassembly.
Related Soundproof Server Cabinet Models
12U Compact Under-Desk Soundproof Server Cabinet
Desk-height 12U acoustic server enclosure engineered for 1U/2U servers, PoE switches, NAS arrays, and UPS units in reception-adjacent clinics and small offices.
View Datasheet →18U Soundproof Office & Clinic Server Cabinet
Mid-size 18U acoustic server cabinet delivering 2.4 kW continuous cooling—double the thermal headroom of legacy 1.2 kW 18U soundproof boxes—with 1050 mm chassis depth.
View Datasheet →32U Studio & Mid-Enterprise Soundproof Server Cabinet
32U soundproof cabinet bridging compact 24U AI racks and full-height 42U deployments: 4.4 kW continuous extraction, 1100 mm depth, and 800 kg structural load rating.
View Datasheet →